Product introduction:
MAST - type A MAST pulsation vacuum sterilizer is according to the modern medical service institutions disinfection supply center for products developed by the latest requirements of high temperature sterilization, to all-round meet the demand of hospital disinfection supply room disinfection sterilization, according to the latest industry standard and the design of the product design, manufacturing and product standards;Container design, the manufacture is in line with GB150-2011 and the stationary pressure vessels safety technology supervision regulation, product design accord with GB8599-2008 large steam sterilizer technology demands and European EN285 large steam sterilizer.If the equipment is used for laboratory, please custom 316 l of the inner configuration.
Product performance and features:
Strictly regulate the body of the machining process
MAST - A pulsating vacuum sterilizer main body of all the stress of weld are conducted using A special welding robot welding, make sure that all the body of the specification, A
, so as to ensure the uniformity of main processing.
Chamber surface without any welding parts
MAST - A pulsating vacuum sterilizer chamber of welding parts, screws and so on without any protrusions, effective protection of the disinfection supply center sterilization bags, and increase
Bacteria chamber protective pads, effective protection sterilization chamber walls, prolong service life.
Reasonable structure of sealing structure
MAST - A pulsating vacuum sterilizer adopts circular hollow gasket, use compressed gas drive door seal, the sealing structure is more durable.
Sandwich and chamber are smart pressure control device
Traditional sterilizer only control the chamber temperature and pressure change, ignore the pressure control of interlining, lead to steam quality is ignored, the MAST - A sandwich
Chamber are intelligent pressure control and steam quality assurance device, the largest extent, ensure the steam pressure and its quality.
Humanized operating system
MAST - A pulsating vacuum sterilizer for meet the demand of user side unloading operation, adopting loading and unloading lateral double panel structure, convenience of customers in A timely manner to understand
For the running state of machine alarm information.
Reasonable line layout, realizes the unilateral repair
MAST - A pulsating vacuum sterilizer line to realize unilateral maintenance, equipment can be installed against the wall, two devices share A space of maintenance, effective save
Supply room installation space.
More rich sterilization procedures
MAST - A pulsating vacuum sterilizer than traditional increase steam sterilizer source pressure detection function and the steam source saturation function, at the same time increase the multiple sterilization
, test procedures, such as PCD, fast, and rubber custom and so on.
Unique vacuum noise reduction device
Traditional sterilizer vacuum pump noise is bigger, become the noisemakers disinfection supply center.MAST - A pulsating vacuum sterilizer are equipped with all the specifications
LNS low noise water-saving vacuum system, this system not only reduces the equipment operation, noise and effectively save the water.
Sterilization operation to ensure solid and reliable, durable sterilizer main body
MAST - A pulsating vacuum sterilizer main body according to the conventional design method and design method for internal stress analysis design, use of modern high simulation software
ANSYS simulation design main body model, design life of 10 years (or 20000 times the sterilization cycle).
Roctec summary
We will provide our customers with perfect after-sales service, to do that is by, dedicated, professional services...
Main products Company production of single/double deck glass reaction kettle, stainless steel reaction kettle, ice-making machine, freeze-drying machine...
Address：Room 1407,West building 1,unit 1.Ziweishangceng,No.A5 Taibai south road,Yanta District,Xi'an city,Shaanxi Province.China.710065. ICP：浙ICP證07500135號 
